Swiss Case Makers
Since the 1920s, Swiss gold and platinum watch cases have carried a maker’s responsibility mark (poinçon de maître): a symbol with a number on it. The symbol tells you where the case was made and in which metal; the number tells you who made it. Six symbols were registered between 1926 and 1958. Geneva-made cases carry the key or the shield; cases made elsewhere in Switzerland carry the hammer head.
The maker’s mark is not the same as the fineness mark (such as the Helvetia head), which guarantees the gold or platinum content and is struck separately on the same case.
Looking to buy or sell a vintage watch? View our collection or contact us.
The Six Maker’s Marks
|
NO. |
MARK |
USED FOR |
|
1 |
Hammer head (hammer without handle) |
Gold, platinum and palladium cases made in Switzerland outside Geneva |
|
2 |
Hammer with handle |
Use not recorded |
|
3 |
FFBA marquee |
Silver cases made in the cantons of Neuchâtel and Jura |
|
4 |
Crossbow |
Silver cases made in the cantons of Neuchâtel and Jura |
|
5 |
Key of Geneva |
Gold, platinum and palladium cases at least 0.3 mm thick made in Geneva. See Geneva Keys |
|
6 |
Shield |
Gold, platinum and palladium cases 0.15 mm thick made in Geneva |
Stainless steel cases carry none of these marks. By the 1930s steel had largely replaced silver, which is why the two silver marks are rarely seen.
Notable Hammer-Head Case Makers
Gold cases made outside Geneva, mostly in the Jura watchmaking towns. A selection of the makers most often seen on fine watches; later names registered under the same number are given in smaller type. Three Geneva makers also appear (Baumgartner, Taubert and Ponti Gennari): they held a hammer head as well as their Geneva Key.
|
NO. |
CASE MAKER |
LOCATION |
REGISTERED |
|
2 |
Fritz Baumgartner |
Geneva |
1934–1958 |
|
11 |
Taubert & Fils |
Geneva |
1934–1958 |
|
26 |
Ponti, Gennari & Cie |
Geneva |
1934–1958 |
|
115 |
A. & M. Favre & Perret |
La Chaux-de-Fonds |
1934– |
|
128 |
Jung & Fils |
La Chaux-de-Fonds |
1934–1966 |
|
132 |
Monnier & Co. |
La Chaux-de-Fonds |
1934–1992 |
|
136 |
C.R. Spillmann & Co. SA |
La Chaux-de-Fonds |
1934–1988 |
|
140 |
B. & C. Dubois |
Le Locle |
1934–1947 |
|
141 |
Gabus Frères |
Le Locle |
1934–1980 |
|
167 |
Carnal & Cie |
La Chaux-de-Fonds |
1934–1976 |
|
170 |
Charles Dubois & Cie |
Le Locle |
1947–1982 |
|
174 |
Huguenin SA |
Le Locle |
1958–1977 |
|
179 |
La Centrale SA |
Bienne |
1962–1978 |
|
183 |
Erwin Piquerez SA |
Bassecourt |
1963–2011 |
|
184 |
Schmitz & Cie |
Nidau/Bienne |
1963–1966 |
|
364 |
Manufacture Ruedin SA |
Bassecourt |
1987– |
Fun fact: Favre & Perret, maker of the first Royal Oak case, saw its number 115 pass to Montres Breguet SA in 2011.
Steel Case Makers
With no official mark for steel, steel cases are identified by the maker’s own trademark or by documented history.
• C.R. Spillmann: the initials CRS stamped inside the caseback identify Spillmann cases for Rolex, including the manual-wind Daytonas, from the pre-Daytona 6238 to the 6263 and 6265. Gold examples carry both CRS and Spillmann’s hammer head 136, as on an 18K 6265/8 sold by Antiquorum in 2022.
• Taubert: pioneered stainless steel cases in Geneva, which most traditional case makers could not work, and supplied Patek Philippe and Vacheron Constantin.
• Georges Croisier (Key 5): Patek Philippe’s best-known steel case maker, including the stainless steel 1518.
• Favre & Perret: the stainless steel Audemars Piguet Royal Oak 5402 (1972).
• Erwin Piquerez (EPSA): the Compressor and Super Compressor cases.
• Huguenin Frères, Le Locle: the initials HF in a painter’s palette (since 1905). The case-making department split from the medal business in the mid-1950s. HF cased Omega’s 1957 trilogy (Speedmaster 2915, Seamaster 300 2913, Railmaster 2914) and later the Speedmaster 105.003; the Speedmaster 105.012 was cased by both HF and Centrale Boîtes. Also the Movado Ermeto (1926) and the Heuer Autavia 2446.
See also: Geneva Keys.
Disclaimer: this information is provided only as a rough guide and is not a means of authentication. Roy & Sacha Davidoff SA is not affiliated with any of the companies listed.
Sources: Swiss Central Office for Precious Metals Control, register of poinçons de maître (via D. Boettcher); Audemars Piguet Chronicles; Collectability; Goldammer; O. Patrizzi and G. Mondani, Daytona Story. Further reading: Goldammer, steel case maker guide.